HEROOS Service Hotline:

0086-574-63121055
sales@heroos.com

PRODUCTS CATALOGUE Product introduction

HEROOS® - PRODUCTS - Sealing Machines - Metal Ring Machines

Contact Us

No.14.Xianfang East Road, Xinjie, Zonghan, Cixi City, Ningbo, China 315301
0086-574-63121055
0086-574-63121077
0086-574-63121033

metal winding gasket ring polishing machine

Manufacturer & Exporter: Cixi Heroos Sealing Materials Co.,Ltd.

 

DESCRIPTION:

in the disc ring process for polishing, burr, scratch the surface of the metal ring with a diameter of 150 mm or more. The roller device adopts pneumatic pressure, large adjustment range, simple operation. With dust removal device, reduce pollution, improve working environment.

 

THE BASIC PARAMETERS:

ModelHEROOS-M07AS
voltage~380V
Power1.95KW
Net weight230KG
Scope of application≥150
length * width * height105x 70 x105cm


metal ring polishing machine for metal disc machine, in the wheel ring after welding, grinding and polishing of the solder joints;

Metal ring polishing machine can also be used to polish the surface of the metal ring;

the equipment for semi-automatic equipment, but with high efficiency.

Manual metal ring polishing machine


A: the installation:

Fan motor, mounted on the carriage remove pole, hand wheel handle, the machine is smooth, pay attention to space when processing large ring.


B: test run:

1, the power of this machine is a three-phase 380V, wiring should choose "Shun" for the work of state.

2, switch on the power, operating the cylinder valve, check the passive roller block operation is flexible, should pay attention to, sundries and lubricating slider.


C: preparation before start:

1, as the ring to adjust the size of the passive wheel spacing distance apart, small ring contraction.

2, the adjustment ring bearing position, let the ring completely supported.


D: operation steps:

1, the metal ring into the groove of the driving wheel, operating pneumatic valve, so that the metal ring inside and outside edge entirely smothered.

2, the operation switch to "Shun" position, start the machine polishing. Using the hand wheel on the polishing force adjusted.

3, when the metal ring is wide, the lateral movement of polishing wheel. Throw good side to stop operation, pneumatic valve, remove the double face processing, complete the operation process.


For more information of Metal ring polishing machine,metal winding gasket ring polishing machine

please email to :  sales@heroos.com   cixiseal@gmail.com    we'll contact you in the shortest time. Thanks!


Machine: *
Name: *
Email: *
Phone: *
message: *
Verify: * Click Refresh!
 
 
Site Map(sitemap)

HEROOS Service Hotline

0086-574-63121055

    F a x:0086-574-63121033
Email:sales@heroos.com